The complete color change is a process of 15 to 20 minutes at 121/250 H in a gravity cycle and 6 minutes in both a 132/270H gravity and vacuum-assisted cycle. When completely processed the colour changes from white to dark black.
This steam indicator tape is used to secure the packs that have been wrapped with woven, non-woven, treated woven, paper and paper/plastic wraps. After the sterilization process is complete, the tape can easily be removed and cleaned, with no adhesive residue.
Steam indicator tapes generally find application for immediate identification of the processed items while they also secure sterilization packs. Color change indicators are used to verify the exposure to the sterilization process. These steam indicator tape, sterilization indicator tape are individually packaged in 55 meters length roll and can also be availed in 25mm and 19 mm width. Mostly used in CSSD departments, these sterilization indicator tape are cut 1 inch in length and stick on the packs to be sterilized.
EO Gas Indicator Tape (Ethylene Oxide Indicator Tapes) are used for sterilization and consists of pink stripes and pressure-sensitive adhesive. The chemical strips convert from pink to green after they are exposed to the EO sterilization process. This indicator tape secures the packs wrapped with paper, paper/plastic and tyvek/plastic, non-woven, woven, treated woven, wraps and are used to distinguish processed and unprocessed packs. Indicator tapes find application for exposure control monitoring and assures that operator handling of the processed items that have been exposed to the sterilization process without the requirement of opening the pack or check load control records.
Plasma Indicator TapePlasma Indicator Tape consists of a non-cellulosic plastic backing material with a pressure-sensitive adhesive on one side and green indicator stripes on the other side. The chemical indicator stripes turn from green to yellow after exposure to vapor hydrogen peroxide in sterilization processes which is a combination of vapor hydrogen peroxide and plasma commonly referred to as gas plasma.
This sterilization indicator tape is used to secure wrapped packs that go into sterilizer and verify the packs that have been exposed to Hydrogen Peroxide. Indicator color does not fade when exposed to light.
IntigratorsSteam and EO Integrator tape is used to monitor exposure to steam or EO conditions. The Intigrators consists of yellow indicator stripes and pressure-sensitive adhesive. When the steam sterilization is complete, the color of the indicator stripes will change from yellow to dark brown or black. It takes about 15 to 20 minutes and a temperature of 121℃/250℉ in a gravity cycle. In 6 minutes and at 132℃/270℉ gravity and vacuum-assisted cycle is complete. The chemical strips turn from pink to green after they have been exposed to the EO sterilization process.
Biological IndicatorsThese indicator tapes are reliable and convenient sterilization monitors that are self-contained and have spore strip designs. They provide the fastest biological indication, such that the results can be availed in in just four hours post processing for ethylene oxide and in three hours for moist heat processes.
Chemical IndicatorsOur range of chemical indicators comply with ISO and ANSI/AAMI/ISO 11140:2005 and provide information on sterilization conditions. In industrial sterilization processing, these indicators are used in conjunction with parametric release processes and provide objective monitoring of sterilization conditions that are completely independent of the sterilizer controls.